Table of Contents
Advertisement
The Remote Controller lets you take part in the
action and control the recording operation from
in front of the Movie Camera.
∫ Buttons on the Remote Controller
The buttons with the same mark as on the Movie
Camera generally have the same function.
1
Zoom Buttons [W/T] (p. 24, 47)
2
Rewind/Review Button [6
To start review playback. (p. 28)
To rewind the tape. (p. 26)
To activate the Camera Search Function.
(p. 22)
To activate the Recording Check Function.
(p. 22)
3
Stop Button [∫] (p. 27)
4
Pause Button [;] (p. 29)
5
Playback Button [1] (p. 27)
3
Replace the Battery
Cover.
2
Aim the Remote Controller at the Remote Control
Sensor on the Movie Camera and press the
appropriate button.
Distance to the Movie Camera: Less than 5 metres.
Angle: Approximately 10° up, and 15° down, left and
right from centre axis.
Remote
Control Sensor
Transmitter
Window
15˚
10˚
15˚
6 ]
6
6
6
Replacing the Batteries
The life of the batteries
is about 1 year.
When the batteries are
exhausted, purchase two
new "AAA", "UM-4" or
"R03" type batteries and
insert them in the same
way as explained on the
left.
15˚
VIDEO CAMERA
1
W
2
REW - SEARCH - FF
6
3
∫
STOP
6
Fast-Forward/Cue Button [5]
To start cue playback. (p. 28)
To fast-forward the tape.
To activate the Camera Search Function.
(p. 22)
7
Recording Start/Stop Button
[START/STOP] (p. 20)
Remarks, etc.
≥Do not mix old batteries with new batteries.
≥Do not mix different battery types, i.e. Alkaline and
Manganese.
≥Do not use rechargeable (Ni-Cd) batteries.
≥Do not short-circuit the batteries.
≥When you do not use the Remote Controller for a
long time, take out the batteries and store it in a
cool, dry place.
≥The operative range described on the left is valid for
using the Remote Controller indoors.
When using it outdoors or under strong lights, it may
not work correctly even within the left range.
≥Within a distance of about 1 metre, it is also possible
to use the Remote Controller from the side ([MENU]
Button side). (NV-VZ15 only)
≥Do not cover the Transmitter Window on the Remote
Controller with your hand, etc.
≥The zoom speed cannot be changed from the
Remote Controller.
To prevent inadvertent operation by other infrared
remote controllers, the Movie Camera needs to
receive each command signal three times. For this
reason, there is a slight delay between pressing the
[W] or [T] Button on the Remote Controller and the
actual operation of the zoom function on the Movie
Camera.
7
START/STOP
T
6
5
5
;
PAUSE
PLAY
1
4
53
Hide quick links:
Advertisement
Table of Contents
