Page 1 Machine Types:...
Page 3: Table Of Contents
Contents Safety information ..Chapter 1. General information ..1 Chapter 2. Server setup road map . . . 5 Chapter 3. Product overview ..7 Chapter 4.
Page 4 Appendix A. Notices ..99 Chapter 7. Troubleshooting and diagnostics ....87 Chapter 8. Getting information, help, and service ....95 Appendix B.
Page 5: Safety Information
Safety information Note: 製品をご使用になる前に、製品に付属の Documentation DVD に収録されているマルチリンガルの「安全に正しくご使用いただくために」を読んで理解してください。 제품을 사용하기 전에 제품과 함께 제공되는 문서 DVD의 다국어 안전 지침을 주의 깊게 읽어보십시오.
Page 6 在使用本产品之前，请务必先阅读和了解产品附带的文档 DVD 中的多语言安全说明。使用本產品之前，請務必閱讀並瞭解產品隨附的文件 DVD 上的多國語言版本安全資訊。 Important: Safety Information Safety Information...
Page 7 Statement 1 DANGER Electrical current from power, telephone, and communication cables is hazardous. To avoid a shock hazard: Do not connect or disconnect any cables or perform installation, maintenance, or reconfiguration of this product during an electrical storm. Connect all power cords to a properly wired and grounded electrical outlet. Ensure that all power cord connectors are securely and completely plugged into receptacles.
Page 8 Statement 3 CAUTION: When laser products (such as CD-ROMs, DVD drives, fiber optic devices, or transmitters) are installed, note the following: • Do not remove the covers. Removing the covers of the laser product could result in exposure to hazardous laser radiation. There are no serviceable parts inside the device. •...
Page 9 Statement 6 CAUTION: If you install a strain-relief bracket option over the end of the power cord that is connected to the device, you must connect the other end of the power cord to a power source that is easily accessible in case it needs to be disconnected.
Page 10 Statement 11 CAUTION: The following label indicates a potential heat hazard. Statement 12 DANGER Overloading a branch circuit is a potential fire hazard and a shock hazard under certain conditions. To avoid these hazards, ensure that your system electrical requirements do not exceed branch current ratings at the installation site.
Page 11 Statement 16 CAUTION: To reduce the risk of electric shock or energy hazards: • This equipment must be installed by trained service personnel in a restricted-access location, as defined by your local electrical code and the latest edition of IEC 60950. •...
Page 12: Safety Inspection Guide
Statement 20 CAUTION: A lithium ion battery is provided. To avoid possible explosion, do not burn the battery. Replace the battery only with the Lenovo-approved part. Recycle or discard the battery as instructed by local regulations. Safety inspection guide Grounding requirements...
Page 13: Chapter 1. General Information
Chapter 1. General information Introduction Hardware Maintenance Manual Hardware Maintenance Manual Note: Warranty and Support Information Warranty and Support Information Server documentation...
Page 14 Printed documents Read Me First Important Notices Documentation DVD Note: Safety Information Warranty and Support Information Lenovo License Agreement User Guide...
Page 15 Document only for trained service personnel Hardware Maintenance Manual...
Page 17: Chapter 2. Server Setup Road Map
Chapter 2. Server setup road map Table 1. Server setup road map Task Where to find the information...
Page 19: Chapter 3. Product Overview
Chapter 3. Product overview Server package Figure 1. Server package Features and specifications...
Page 20 Table 2. Features and specifications Microprocessor: System management features ™ Input/Output (I/O) features Products Options ➙ ThinkServer Processors Memory Preinstalled operating system Internal drives Video subsystem Supported operating systems: Connectivity Power supply assembly: Note: Expansion...
Page 21 Table 2. Features and specifications (continued) Integrated functions: Environment Dimensions: Weight Electrical input Security features Reliability, availability, and serviceability...
Page 22 Software ThinkServer EasyStartup ThinkServer EasyStartup ThinkServer EasyUpdate Firmware Updater BIOS update utilities RAID configuration utilities Diagnostic programs...
Page 25: Chapter 4. Locating Parts, Controls, And Connectors
Chapter 4. Locating parts, controls, and connectors Machine type, model, and serial number label Machine Type: XXXX Model Number: XXX S/N: XXXXXXX Figure 2. Machine type, model, and serial number label Front view...
Page 26: Rear View
Figure 3. Front control and connector locations Rear view...
Page 27 Figure 4. Rear connector locations Connector Description...
Page 28 Connector Description Note: Figure 5. Ethernet status LEDs Ethernet status LED Color Status Description...
Page 29: Locating Parts On The System Board
Locating parts on the system board Figure 6. System board part locations...
Page 30: Internal Components
Internal components Figure 7. Component locations Internal drives...
Page 31: Server Components
Figure 8. Drive bay locations Server components Note:...
Page 32 Figure 9. Server components Notes:...
Page 33 Self-service Optional-service FRU description...
Page 35: Chapter 5. Installing, Removing, Or Replacing Hardware
Chapter 5. Installing, removing, or replacing hardware Guidelines Precautions...
Page 36 Handling static-sensitive devices Attention: Notes:...
Page 37 Note: System reliability guidelines Working inside the server with the power on Attention: Removing the server cover Attention:...
Page 38: Removing And Reinstalling The Front Bezel
CAUTION: Turn off the server and wait three to five minutes to let the server cool before removing the server cover. Figure 10. Removing the server cover Removing and reinstalling the front bezel Attention:...
Page 39 Figure 11. Removing the front bezel...
Page 40 Figure 12. Reinstalling the front bezel What to do next: Installing, removing, or replacing optional hardware devices Installing or replacing a PCI card Attention:...
Page 41 Figure 13. Opening the PCI card latch...
Page 42 Notes: Figure 14. Removing a PCI card Note:...
Page 43: Installing Or Removing The Ethernet Card
Figure 15. Installing a PCI card What to do next: Installing or removing the Ethernet card Attention:...
Page 44: Installing Or Removing A Memory Module
ThinkServer EasyStartup Note: My Computer Properties Hardware Device Manager Network adapters Update Driver... Install the software automatically (Recommended) Next What to do next: Installing or removing a memory module Attention:...
Page 45 Figure 16. Removing a memory module Figure 17. Opening the retaining clips...
Page 46: Installing Or Replacing The Optical Drive
Note: Figure 18. Installing a memory module What to do next: Installing or replacing the optical drive Attention:...
Page 47 Figure 19. Removing the optical drive Figure 20. Installing the optical drive...
Page 48: Replacing The Primary Hard Disk Drive
Figure 21. Connecting a SATA optical drive What to do next: Replacing the primary hard disk drive Attention:...
Page 49 Figure 22. Removing the primary hard disk drive Note: Figure 23. Installing the hard disk drive into the bracket...
Page 50 Note: Figure 24. Installing the primary hard disk drive...
Page 51: Installing Or Replacing The Secondary Hard Disk Drive
Figure 25. Connecting a SATA hard disk drive What to do next: Installing or replacing the secondary hard disk drive Attention:...
Page 52 Figure 26. Removing the secondary hard disk drive Note: Figure 27. Installing the hard disk drive into the bracket...
Page 53 Figure 28. Installing the secondary hard disk drive...
Page 54: Replacing The Power Supply Assembly
Figure 29. Installing the secondary hard disk drive Figure 30. Connecting a SATA hard disk drive Installing, removing, or replacing hardware devices Replacing the power supply assembly Attention:...
Page 55 DANGER Hazardous moving parts. Keep fingers and other body parts away. CAUTION: Never remove the cover on a power supply or any part that has the following label attached. Hazardous voltage, current, and energy levels are present inside any component that has this label attached.
Page 56 Figure 31. Removing the screws that secure the power supply assembly Figure 32. Removing the power supply assembly Note:...
Page 57: Replacing The Heat Sink And Fan Assembly
What to do next: Replacing the heat sink and fan assembly Attention: CAUTION: Turn off the server and wait three to five minutes to let the server cool before removing the server cover.
Page 58 Note: Figure 33. Removing the heat sink and fan assembly Notes: Note: What to do next:...
Page 59: Replacing The Front Audio And Usb Assembly
Replacing the front audio and USB assembly Attention: Figure 34. Removing the front audio and USB assembly...
Page 60 What to do next: Replacing the front fan assembly Attention: Note:...
Page 61 Figure 35. Removing the front fan assembly...
Page 62: Replacing The Rear Fan Assembly
Figure 36. Installing the front fan assembly What to do next: Replacing the rear fan assembly Attention:...
Page 63 Figure 37. Removing the rear fan assembly Note:...
Page 64: Replacing The Microprocessor
Figure 38. Installing the rear fan assembly What to do next: Replacing the microprocessor Attention: CAUTION: The heat sink and microprocessor might be very hot. Turn off the computer and wait three to five minutes to let the computer cool before removing the computer cover.
Page 65 Note: Figure 39. Accessing the microprocessor Figure 40. Removing the microprocessor Notes:...
Page 66 Figure 41. Installing the microprocessor...
Page 67: Replacing The System Board Battery
What to do next: Replacing the system board battery Attention: Statement 2 CAUTION: When replacing the lithium battery, use only the battery recommended by the manufacturer. If your system has a module containing a lithium battery, replace it only with the same module type made by the same manufacturer.
Page 68: Replacing The System Board
Figure 42. Removing the old system board battery Figure 43. Installing the new system board battery Note: What to do next: Replacing the system board Attention: Note: CAUTION: The heat sink and microprocessor might be very hot. Turn off the server and wait three to five minutes to let the server cool before removing the server cover.
Page 70 Note: Completing the parts replacement...
Page 71: Connecting The Cables
Figure 44. Reinstalling the server cover Note: Connecting the cables Attention:...
Page 72: Turning On The Server
Turning on the server Turning off the server Statement 5 CAUTION: The power control button on the device and the power switch on the power supply do not turn off the electrical current supplied to the device. The device also might have more than one power cord.
Page 73 Note: Safety Information Updating the server configuration Installing security features Note: Integrated cable lock Kensington Padlock Password protection...
Page 75: Chapter 6. Configuring The Server
Chapter 6. Configuring the server Setup Utility ThinkServer EasyStartup EasyUpdate Firmware Updater Using the Setup Utility program Starting the Setup Utility program Note: Introduction of the BIOS items Notes:...
Page 76 Table 3. Items under the Setup Utility program menu Item Description Main Devices Advanced Power Security Startup Exit Table 4. Items under the Main menu Item Option or description System Summary System Time & Date Notes: Main...
Page 77 Table 5. Submenus under the System Summary menu Item Option or description Note: Table 6. Submenus under the System Time & Date menu Item Option Description Table 7. Items under the Devices menu Item Description Serial Port Setup USB Setup ATA Drive Setup Video Setup Audio Setup...
Page 78 Table 8. Submenus under the Serial Port Setup menu Item Option Description Note: Table 9. Submenus under the USB Setup menu Item Option Description Note: Table 10. Submenus under the ATA Drive Setup menu Item Option Description Note:...
Page 79 Table 10. Submenus under the ATA Drive Setup menu (continued) Item Option Description Note: Table 11. Submenus under the Video Setup menu Item Option Description Auto Notes: Note: Note: Table 12. Submenus under the Audio Setup menu Item Option Description Note:...
Page 80 Table 13. Submenus under the Network Setup menu Item Option Description Note: Disabled Note: Table 14. Items under the Advanced menu Item Option or description CPU Setup Intel Manageability Note: Table 15. Submenus under the CPU Setup menu Item Option Description ™...
Page 81 Table 15. Submenus under the CPU Setup menu (continued) Item Option Description Enabled Note: Enabled Active Notes:...
Page 82 ® Table 16. Submenus under the Intel Manageability menu Item Option Description Note: SOL Configuration Notes: Table 17. Submenus under the SOL Configuration menu Item Option Description Notes:...
Page 83 Table 18. Items under the Power menu Item Option Description Power On Power Off Last State Note: Automatic Power On Note: Table 19. Submenus under the Automatic Power On menu Item Option Description Note:...
Page 84 Table 19. Submenus under the Automatic Power On menu (continued) Item Option Description Note: Note: Table 20. Items under the Security menu Item Option Description Note: Note:...
Page 85 Table 20. Items under the Security menu (continued) Item Option Description Hard Disk Password Fingerprint Setup TCG Feature Setup System Event Log Note: Table 21. Submenus under the Hard Disk Password menu Item Option Description Note: Note:...
Page 86 Table 21. Submenus under the Hard Disk Password menu (continued) Item Option Description Note: Note: Note: Note: Table 22. Submenus under the TCG Feature Setup submenu Item Option Description Active Inactive Disabled Note: Inactive Disabled Disabled Note:...
Page 87 Table 23. Submenus under the Fingerprint Setup menu Item Option Description Note: Table 24. Submenus under the System Event Log menu Item Description Table 25. Items under the Startup menu Item Option Description Auto UEFI Legacy Enabled Disabled...
Page 88: Viewing And Changing Settings
Table 25. Items under the Startup menu (continued) Item Option Description Note: Note: Normal interrupt normal startup, press Enter Legacy Press F1 to enter Setup and press F12 to display Boot Menu Note: Table 26. Items under the Exit menu Item Description Viewing and changing settings...
Page 89 Using passwords Password considerations Power-On Password Administrator Password Hard Disk Password Notes:...
Page 90: Enabling Or Disabling A Device
Setting, changing, and deleting a password Security Set Power-On Password Set Administrator Password Hard Disk Password Note: Erasing lost or forgotten passwords (clearing CMOS) Note: Enabling or disabling a device USB Setup SATA Controller Disabled External SATA Port Disabled...
Page 91: Configuring Raid
Devices USB Setup ATA Drive Setup Selecting a startup device Selecting a temporary startup device Note: Note: Selecting or changing the startup device sequence Startup Exiting from the Setup Utility program Exit ➙ Discard Changes and Exit Configuring RAID...
Page 92: Raid Level
Note: RAID level Configuring the system BIOS to enable SATA RAID functionality Note: Devices ➙ ATA Drive Setup Configure SATA as RAID Mode Creating RAID volumes Create RAID Volume Name RAID Level Stripe Size Capacity Exit...
Page 93 Deleting RAID volumes Delete RAID Volume Exit Resetting disks to non-RAID Reset Disks to Non-RAID Exit Updating the firmware Notes:...
Page 94 Using the Firmware Updater program Note: Using the ThinkServer EasyStartup program ThinkServer EasyStartup ThinkServer EasyStartup Features of the ThinkServer EasyStartup program...
Page 95: Starting The Thinkserver Easystartup Program
ThinkServer EasyStartup Starting the ThinkServer EasyStartup program User Guide ThinkServer EasyStartup Note: ThinkServer EasyStartup Next Agree Notes: Compatibility notes User Guide Home...
Page 96 Compatibility notes User Guide Hardware list Install operating system Download drivers ThinkServer EasyStartup Note: About Using the ThinkServer EasyStartup program on a Windows operating system ThinkServer EasyStartup ThinkServer EasyStartup Notes: ThinkServer EasyStartup ThinkServer EasyStartup ThinkServer EasyStartup...
Page 97: Updating System Programs
ThinkServer EasyStartup Note: Updating system programs Using system programs Updating (flashing) the BIOS from a disc Note: Startup Device Menu Startup Device Menu...
Page 98 Updating (flashing) the BIOS from your operating system Note: Enter a product number Downloads and drivers BIOS Refine results Recovering from a BIOS update failure...
Page 99: Chapter 7. Troubleshooting And Diagnostics
Chapter 7. Troubleshooting and diagnostics Basic troubleshooting Note: Warranty and Support Information General problems Symptom Action Using a diagnostic program...
Page 100 Continue Accept Troubleshooting tables Hard disk drive boot error Symptom FRU/Action Power supply problems...
Page 101: Beep Symptoms
Check/Verify FRU/Action Beep symptoms Symptom Error FRU/Action POST error codes power-on self-test POST POST error code POST error message Description/Action...
Page 102 POST error code POST error message Description/Action Note:...
Page 103: Easystartup Problems
POST error code POST error message Description/Action EasyStartup problems Table 27. ThinkServer EasyStartup DVD Follow the suggested actions in the order in which they are listed in the Action column until the problem is resolved. Symptom Action ThinkServer EasyStartup EasyStartup User Guide EasyStartup User Guide Miscellaneous error messages Symptom...
Page 104 Symptom FRU/Action First device - Network Second device - Hard disk drive...
Page 105: Undetermined Problems
Symptom FRU/Action Undetermined problems...
Page 107: Chapter 8. Getting Information, Help, And Service
Chapter 8. Getting information, help, and service Information resources Using the documentation Hardware Maintenance Manual ThinkServer Web site Lenovo Support Web site...
Page 108: Help And Service
Help and service Before you call Calling for service Problem determination Hardware repair Engineering Change management...
Page 109 Warranty and Support Information Using other services Warranty Purchasing additional services...
Page 111: Appendix A. Notices
Appendix A. Notices Lenovo (United States), Inc. 1009 Think Place - Building One Morrisville, NC 27560 U.S.A. Attention: Lenovo Director of Licensing...
Page 112 Trademarks Important notes Particulate contamination Attention:...
Page 113: Recycling Information
Table 28. Limits for particulates and gases Contaminant Limits Method of Testing General Ventilation Air-Cleaning Devices for Removal Efficiency by Particle Size Environmental conditions for process measurement and control systems: Airborne contaminants Polyvinyl Chloride (PVC) cable and cord notice WARNING: Wash hands after handling Recycling information...
Page 114: Battery Return Program
Battery return program Battery recycling information for the European Union Notice:...
Page 115 Requirements for Batteries Containing Perchlorate Important WEEE information Restriction of Hazardous Substances Directive (RoHS)
Page 116 China RoHS Turkish RoHS...
Page 117 India RoHS German Ordinance for Work gloss statement Export classification notice Electronic emission notices User Guide ENERGY STAR model information...
Page 118 Brazil regulatory notice...
Page 119: Appendix B. İthalatçı - İmalatçı / Üretici Firma Bilgileri Ve Diğer Bilgiler
Appendix B. İthalatçı – İmalatçı / Üretici Firma Bilgileri ve Diğer Bilgiler İmalatçı ya da ithalatçı firmaya ilişkin bilgiler: Bakım, onarım ve kullanımda uyulması gereken kurallar: Taşıma ve nakliye sırasında dikkat edilecek hususlar: Aygıta ilişkin bakım, onarım ya da temizliğe ilişkin bilgiler: Kullanım sırasında insan ya da çevre sağlığına zararlı...
Page 120 Bağlantı ve montaja ilişkin bilgiler: Bakanlıkça tespit ve ilan edilen kullanım ömrü: Enerji tüketen mallarda, malın enerji tüketimi açısından verimli kullanımına ilişkin bilgiler: Servis istasyonlarına ilişkin bilgiler: İthal edilmiş mallarda, yurt dışındaki üretici firmanın unvanı ve açık adresi ile diğer erişim bilgileri (telefon, telefaks ve e-posta vb.):...
Page 121: Appendix C. Servis İstasyonları Ve Yedek Parça Malzemelerinin Temin Edileceği Adresler
Appendix C. Servis İstasyonları ve Yedek Parça Malzemelerinin Temin Edileceği Adresler Garanti Hizmetinin Alınabileceği Merkezler ANKARA Bdh Bilişim Destek Hiz. San. Ve Tic. A.Ş. Destek Bilgisayar Ve İletişim Hiz. Tic. A.Ş. BURSA Bdh Bilişim Destek Hizmetleri San.Ve Tic. Netpro Bilgisayar Büro Makinaları Elektronik Sanayi Ve Özel Eğitim Hizmetleri Ticaret Ltd.Şti. DENİZLİ...
Page 122 DİYARBAKIR Metro Bilgisayar Eğitim Tic. ve San.Ltd. Şti. İSTANBUL Bdh Bilişim Destek Hizmetleri San.Ve Tic.Aş. Bilgi Birikim Sistemleri Elktr. ve Bilg. D Yedi Yirmidört Bilişim Hizmetleri Ticaret A.S. İntegra Profesyonel Hiz. Ltd. Şti. İntercomp Bilgisayar Sanayi Ve Hizmetleri Ltd. Şti. Netservis Bilgisayar Sistemleri San.
Page 123 Peritus Bilgisayar Sist. Dış Tic.San.Ltd.Şti. Seri Bilgi Teknolojileri LTD ŞTI. İZMİR Adapa Bilgi Sistemleri Tur.San. Ve Tic.A.Ş. Bdh Bilişim Destek Hizmetleri San.Ve Tic. A.Ş. Ege Bimtes Bilgi İşlem Mak.Ser.San.Ve Tic.Ltd.Şti MALATYA Bdh Bilişim Destek Hizmetleri Sanayi Ve Ticaret A.Ş. SAMSUN Bdh Bilişim Destek Hizmetleri San.Ve Tic.A.Ş.
Page 124 ŞANLIURFA Bdh Bilişim Destek Hizmetleri San.Ve Tic. Bilban Bilgisayar Eğitim Tic. San. Ltd. Şti.
Page 125: Index
Index...

This manual is also suitable for:

Thinkserver ts130 1100 Thinkserver ts130 1105 Thinkserver ts130 1106

Lenovo ThinkServer TS130 1098 Hardware Maintenance Manual

Chapter 1. General Information

Chapter 2. Server Setup Road Map

Chapter 3. Product Overview

Chapter 4. Locating Parts, Controls, and Connectors

Chapter 5. Installing, Removing, or Replacing Hardware

Chapter 6. Configuring the Server

Chapter 7. Troubleshooting and Diagnostics

Chapter 8. Getting Information, Help, and Service

Appendix A. Notices

Appendix B. İthalatçı - İmalatçı / Üretici Firma Bilgileri Ve DIğer Bilgiler

Appendix C. Servis İstasyonları Ve Yedek Parça Malzemelerinin Temin EdileceğI Adresler

Quick Links

Related Manuals for Lenovo ThinkServer TS130 1098

Summary of Contents for Lenovo ThinkServer TS130 1098

This manual is also suitable for:

Table of Contents